01 - Introduction to ‘pbkrtest’

## Loading required package: pbkrtest
## Loading required package: lme4
## Loading required package: Matrix

Package version: 0.5.2.9002

Introduction

The data is a list of two vectors, giving the wear of shoes of materials A and B for one foot each of ten boys.

data(shoes, package="MASS")
shoes
## $A
##  [1] 13.2  8.2 10.9 14.3 10.7  6.6  9.5 10.8  8.8 13.3
## 
## $B
##  [1] 14.0  8.8 11.2 14.2 11.8  6.4  9.8 11.3  9.3 13.6

A plot reveals that boys wear their shoes differently.

plot(A ~ 1, data=shoes, col="red",lwd=2, pch=1, ylab="wear", xlab="boy")
points(B ~ 1, data=shoes, col="blue", lwd=2, pch=2)
points(I((A + B) / 2) ~ 1, data=shoes, pch="-", lwd=2)

One option for testing the effect of materials is to make a paired t–test, e.g. as:

r1 <- t.test(shoes$A, shoes$B, paired=T)
r1 |> tidy()
## # A tibble: 1 × 8
##   estimate statistic p.value parameter conf.low conf.high method     alternative
##      <dbl>     <dbl>   <dbl>     <dbl>    <dbl>     <dbl> <chr>      <chr>      
## 1    -0.41     -3.35 0.00854         9   -0.687    -0.133 Paired t-… two.sided

To work with data in a mixed model setting we create a dataframe, and for later use we also create an imbalanced version of data:

boy <- rep(1:10, 2)
boyf<- factor(letters[boy])
material <- factor(c(rep("A", 10), rep("B", 10)))
## Balanced data:
shoe.bal <- data.frame(wear=unlist(shoes), boy=boy, boyf=boyf, material=material)
head(shoe.bal)
##    wear boy boyf material
## A1 13.2   1    a        A
## A2  8.2   2    b        A
## A3 10.9   3    c        A
## A4 14.3   4    d        A
## A5 10.7   5    e        A
## A6  6.6   6    f        A
## Imbalanced data; delete (boy=1, material=1) and (boy=2, material=b)
shoe.imbal <-  shoe.bal[-c(1, 12),]

We fit models to the two datasets:

lmm1.bal  <- lmer( wear ~ material + (1|boyf), data=shoe.bal)
lmm0.bal  <- update(lmm1.bal, .~. - material)
lmm1.imbal  <- lmer(wear ~ material + (1|boyf), data=shoe.imbal)
lmm0.imbal  <- update(lmm1.imbal, .~. - material)

The asymptotic likelihood ratio test shows stronger significance than the t–test:

anova(lmm1.bal, lmm0.bal, test="Chisq")  |> tidy()
## refitting model(s) with ML (instead of REML)
## # A tibble: 2 × 9
##   term      npar   AIC   BIC logLik deviance statistic    df  p.value
##   <chr>    <dbl> <dbl> <dbl>  <dbl>    <dbl>     <dbl> <dbl>    <dbl>
## 1 lmm0.bal     3  67.9  70.9  -31.0     61.9     NA       NA NA      
## 2 lmm1.bal     4  61.8  65.8  -26.9     53.8      8.09     1  0.00445
anova(lmm1.imbal, lmm0.imbal, test="Chisq")  |> tidy()
## refitting model(s) with ML (instead of REML)
## # A tibble: 2 × 9
##   term        npar   AIC   BIC logLik deviance statistic    df p.value
##   <chr>      <dbl> <dbl> <dbl>  <dbl>    <dbl>     <dbl> <dbl>   <dbl>
## 1 lmm0.imbal     3  63.9  66.5  -28.9     57.9     NA       NA NA     
## 2 lmm1.imbal     4  60.8  64.3  -26.4     52.8      5.09     1  0.0240

Kenward–Roger approach

The Kenward–Roger approximation is exact in certain balanced designs in the sense that the approximation produces the same result as the paired t–test.

kr.bal <- KRmodcomp(lmm1.bal, lmm0.bal)
kr.bal |> tidy()
## # A tibble: 1 × 5
##   type   stat   ndf   ddf p.value
##   <chr> <dbl> <int> <dbl>   <dbl>
## 1 Ftest  11.2     1  9.00 0.00854
summary(kr.bal) |> tidy() 
## F-test with Kenward-Roger approximation; time: 0.05 sec
## large : wear ~ material + (1 | boyf)
## small : wear ~ (1 | boyf)
##          stat    ndf    ddf F.scaling  p.value   
## Ftest  11.215  1.000  9.000         1 0.008539 **
## FtestU 11.215  1.000  9.000           0.008539 **
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## # A tibble: 2 × 6
##   type    stat   ndf   ddf F.scaling p.value
##   <chr>  <dbl> <int> <dbl>     <dbl>   <dbl>
## 1 Ftest   11.2     1  9.00         1 0.00854
## 2 FtestU  11.2     1  9.00        NA 0.00854

For the imbalanced data we get

kr.imbal <- KRmodcomp(lmm1.imbal, lmm0.imbal)
kr.imbal |> tidy()
## # A tibble: 1 × 5
##   type   stat   ndf   ddf p.value
##   <chr> <dbl> <int> <dbl>   <dbl>
## 1 Ftest  5.99     1  7.02  0.0442
summary(kr.imbal) |> tidy()
## F-test with Kenward-Roger approximation; time: 0.02 sec
## large : wear ~ material + (1 | boyf)
## small : wear ~ (1 | boyf)
##          stat    ndf    ddf F.scaling p.value  
## Ftest  5.9893 1.0000 7.0219         1 0.04418 *
## FtestU 5.9893 1.0000 7.0219           0.04418 *
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
## # A tibble: 2 × 6
##   type    stat   ndf   ddf F.scaling p.value
##   <chr>  <dbl> <int> <dbl>     <dbl>   <dbl>
## 1 Ftest   5.99     1  7.02         1  0.0442
## 2 FtestU  5.99     1  7.02        NA  0.0442

Estimated degrees of freedom can be found with

c(bal_ddf = getKR(kr.bal, "ddf"), imbal_ddf = getKR(kr.imbal, "ddf"))
##   bal_ddf imbal_ddf 
##  9.000000  7.021904

Notice that the Kenward-Roger approximation gives results similar to but not identical to the paired t–test when the two boys are removed:

shoes2 <- list(A=shoes$A[-(1:2)], B=shoes$B[-(1:2)])
t.test(shoes2$A, shoes2$B, paired=T) |> tidy()
## # A tibble: 1 × 8
##   estimate statistic p.value parameter conf.low conf.high method     alternative
##      <dbl>     <dbl>   <dbl>     <dbl>    <dbl>     <dbl> <chr>      <chr>      
## 1   -0.337     -2.39  0.0483         7   -0.672  -0.00328 Paired t-… two.sided

Satterthwaite approach

The Satterthwaite approximation is exact in certain balanced designs in the sense that the approximation produces the same result as the paired t–test.

sat.bal <- SATmodcomp(lmm1.bal, lmm0.bal)
sat.bal |> tidy()
## # A tibble: 1 × 5
##   type  statistic   ndf   ddf p.value
##   <chr>     <dbl> <int> <dbl>   <dbl>
## 1 Ftest      11.2     1  9.00 0.00854
sat.imbal <- SATmodcomp(lmm1.imbal, lmm0.imbal)
sat.imbal |> tidy()
## # A tibble: 1 × 5
##   type  statistic   ndf   ddf p.value
##   <chr>     <dbl> <int> <dbl>   <dbl>
## 1 Ftest      6.00     1  7.01  0.0441

Estimated degrees of freedom can be found with

c(bal_ddf = getSAT(sat.bal, "ddf"), imbal_ddf = getSAT(sat.imbal, "ddf"))
##   bal_ddf imbal_ddf 
##  9.000000  7.010863

Parametric bootstrap

Parametric bootstrap provides an alternative but many simulations are often needed to provide credible results (also many more than shown here; in this connection it can be useful to exploit that computations can be made en parallel, see the documentation):

pb.bal <- PBmodcomp(lmm1.bal, lmm0.bal, nsim=500, cl=2)
pb.bal |> tidy()
## # A tibble: 2 × 4
##   type    stat    df p.value
##   <chr>  <dbl> <dbl>   <dbl>
## 1 LRT     8.09     1 0.00445
## 2 PBtest  8.09    NA 0.0140
summary(pb.bal) |> tidy()
## # A tibble: 5 × 5
##   type      stat    df   ddf p.value
##   <chr>    <dbl> <dbl> <dbl>   <dbl>
## 1 LRT       8.09     1  NA   0.00445
## 2 PBtest    8.09    NA  NA   0.0140 
## 3 Gamma     8.09    NA  NA   0.00815
## 4 Bartlett  6.59     1  NA   0.0103 
## 5 F         8.09     1  10.8 0.0163

For the imbalanced data, the result is similar to the result from the paired t–test.

pb.imbal <- PBmodcomp(lmm1.imbal, lmm0.imbal, nsim=500, cl=2)
pb.imbal |> tidy()
## # A tibble: 2 × 4
##   type    stat    df p.value
##   <chr>  <dbl> <dbl>   <dbl>
## 1 LRT     5.09     1  0.0240
## 2 PBtest  5.09    NA  0.0379
summary(pb.imbal)  |> tidy()
## # A tibble: 5 × 5
##   type      stat    df   ddf p.value
##   <chr>    <dbl> <dbl> <dbl>   <dbl>
## 1 LRT       5.09     1  NA    0.0240
## 2 PBtest    5.09    NA  NA    0.0379
## 3 Gamma     5.09    NA  NA    0.0444
## 4 Bartlett  4.13     1  NA    0.0421
## 5 F         5.09     1  10.6  0.0462

Matrices for random effects

The matrices involved in the random effects can be obtained with

shoe3 <- subset(shoe.bal, boy<=5)
shoe3 <- shoe3[order(shoe3$boy), ]
lmm1  <- lmer( wear ~ material + (1|boyf), data=shoe3 )
str( SG <- get_SigmaG( lmm1 ), max=2)
## List of 3
##  $ Sigma   :Formal class 'dgCMatrix' [package "Matrix"] with 6 slots
##  $ G       :List of 2
##   ..$ :Formal class 'dgCMatrix' [package "Matrix"] with 6 slots
##   ..$ :Formal class 'dgCMatrix' [package "Matrix"] with 6 slots
##  $ n.ggamma: int 2
round( SG$Sigma*10 )
## 10 x 10 sparse Matrix of class "dgCMatrix"
##   [[ suppressing 10 column names 'A1', 'B1', 'A2' ... ]]
##                                 
## A1 53 52  .  .  .  .  .  .  .  .
## B1 52 53  .  .  .  .  .  .  .  .
## A2  .  . 53 52  .  .  .  .  .  .
## B2  .  . 52 53  .  .  .  .  .  .
## A3  .  .  .  . 53 52  .  .  .  .
## B3  .  .  .  . 52 53  .  .  .  .
## A4  .  .  .  .  .  . 53 52  .  .
## B4  .  .  .  .  .  . 52 53  .  .
## A5  .  .  .  .  .  .  .  . 53 52
## B5  .  .  .  .  .  .  .  . 52 53
SG$G
## [[1]]
## 10 x 10 sparse Matrix of class "dgCMatrix"
##   [[ suppressing 10 column names 'A1', 'B1', 'A2' ... ]]
##                       
## A1 1 1 . . . . . . . .
## B1 1 1 . . . . . . . .
## A2 . . 1 1 . . . . . .
## B2 . . 1 1 . . . . . .
## A3 . . . . 1 1 . . . .
## B3 . . . . 1 1 . . . .
## A4 . . . . . . 1 1 . .
## B4 . . . . . . 1 1 . .
## A5 . . . . . . . . 1 1
## B5 . . . . . . . . 1 1
## 
## [[2]]
## 10 x 10 sparse Matrix of class "dgCMatrix"
##                          
##  [1,] 1 . . . . . . . . .
##  [2,] . 1 . . . . . . . .
##  [3,] . . 1 . . . . . . .
##  [4,] . . . 1 . . . . . .
##  [5,] . . . . 1 . . . . .
##  [6,] . . . . . 1 . . . .
##  [7,] . . . . . . 1 . . .
##  [8,] . . . . . . . 1 . .
##  [9,] . . . . . . . . 1 .
## [10,] . . . . . . . . . 1